| Showing 1-10 of 71 products found. | ||||
|
||||
ACT Gauge - Blue NEW PRODUCT |
| To suit RS Turbos and Cosworths (direct fitment into OE fitting on inlet manifold, but will fit other cars where plenum can be drilled and tapped to 1/8" BSP), just two wires to connect (earth and ignition live) and a K-type thermocouple to screw into the inlet manifold. Samples three times every second, LED backlit, lifetime warranty (manufacturing defects). Can be upgraded to control ERL water injection kit. Cut out required is 45mm x 22mm. Bezel size is 48mm x 24mm. BLUE backlit. This new gauge can now monitor temps up to 1025°C (if used with the correct thermocouple). In this application, the thermocouple we use is capable of measuring up to 250°C, which means it is suitable to measure pre-intercooler temps as well as post intercooler temps, along with any fluid temps that are within this range (such as oil and water). Price includes delivery within the UK. |
£78.00 |
| Details |
ACT Gauge - Green - NEW PRODUCT |
| To suit RS Turbos and Cosworths (direct fitment into OE fitting on inlet manifold, but will fit other cars where plenum can be drilled and tapped to 1/8" BSP ), just two wires to connect (earth and ignition live) and a K-type thermocouple to screw into the inlet manifold. Samples three times every second, LED backlit, lifetime warranty (manufacturing defects). Can be upgraded to control ERL water injection kit. Cut out required is 45mm x 22mm. Bezel size is 48mm x 24mm. GREEN backlit. This new gauge can now monitor temps up to 1025°C (if used with the correct thermocouple). In this application, the thermocouple we use is capable of measuring up to 250°C, which means it is suitable to measure pre-intercooler temps as well as post intercooler temps, along with any fluid temps that are within this range (such as oil and water). Price includes delivery within the UK. |
£78.00 |
| Details |
ACT Gauge - Red - NEW PRODUCT |
| To suit RS Turbos and Cosworths (direct fitment into OE fitting on inlet manifold, but will fit other cars where plenum can be drilled and tapped to 1/8" BSP), just two wires to connect (earth and ignition live) and a K-type thermocouple to screw into the inlet manifold. Samples three times every second, LED backlit, lifetime warranty (manufacturing defects). Can be upgraded to control ERL water injection kit. Cut out required is 45mm x 22mm. Bezel size is 48mm x 24mm. RED backlit. This new gauge can now monitor temps up to 1025°C (if used with the correct thermocouple). In this application, the thermocouple we use is capable of measuring up to 250°C, which means it is suitable to measure pre-intercooler temps as well as post intercooler temps, along with any fluid temps that are within this range (such as oil and water). Price includes delivery within the UK. |
£78.00 |
| Details |
Boost pods |
| Custom made to suit 60mm gauges (single or twin) prices start from £45. Please note that these are hand made and are shaped to ensure the best sighting possible. |
£45.00 |
| Details |
Collins monitors |
| The monitor is available as a standard version and also as a professional version (the standard version is priced above). The monitor displays real-time engine management parameters, these include: Engine RPM (rpm), Coolant Temperature (ºC), Charge Air Temperature (ºC), Boost Pressure (absolute) (bar), Battery Voltage (V), Throttle Position (º), Ignition Timing (º BTDC), Fuel Injector Opening Time (mS), Sensor Fault Detection, 4 channels of analogue data (optional), Current Ignition Map Address (Professional Version only), Current Fuel Map Address (Professional Version only), Blanket Fuel Adjustment (Professional Version only), Blanket Ignition Adjustment (Professional Version only), The monitor works with ‘Ford Cosworths' that run the Magneti Marelli L6, L8 or P8 ECU if the correct Powerchip / Pectel chip is also fitted. So this includes all ECUs running Pectel / Collins boards (the comms support may need enabling, which we can do for a small charge on L8s, but some P8s may need a £50 mod to the board). Having spoken to MSD, I am lead to believe that some of their software also supports this, but you would have to confirm with them to be sure before ordering, as many do not, as they obviously favour their own IAD monitoring software. Easy to install - plugs into ECU diagnostic connector. PLEASE NOTE IF YOUR ECU IS NOT LISTED ABOVE IT WILL NOT WORK, NOR WILL IT BE PRODUCED AT A LATER DATE. Delivery is extra |
£325.00 |
| Details |
Combined ACT / EGT gauge - NEW PRODUCT |
| To suit RS Turbos and Cosworths (ACT thermocouple is direct fitment into OE fitting on inlet manifold, but will fit other cars where plenum can be drilled and tapped to 1/8" BSP ), EGT thermocouple requires boss welding into downpipe to suit (same size as above), then just two wires to connect (earth and ignition live). Toggle switch supplied to switch between two sensors. Gauge samples three times every second to ensure accurate monitoring of temps, LED backlit, lifetime warranty (manufacturing defects). Can be upgraded to control ERL water injection kit. Cut out required is 45mm x 22mm. Bezel size is 48mm x 24mm. GREEN (pictured), RED or BLUE backlit (please specifiy when ordering). This new gauge can now monitor temps up to 1025°C (so could be used any other fluid temps as well). Additional thermocouples can be added at £35 each for EGT or £25 for fluid temps (up to 250°C). Price includes delivery within UK. |
£115.50 |
| Details |
Defi BF - Boost - White |
| Available in both 2.0 Kgf/cm² (equivalent to bar) or 28psi, in 60mm ONLY. Beautifully built, these are proper electromechanical gauges with stepper motors for a smooth and accurate operation (not to be confused with normal mechanical gauges). Have benefit of user set and defined alarm warning feature, peak memory recall and the ability to record and play back 3 minutes worth of information, plus the unique black face display when the gauge is shut down. DELIVERY is extra. |
£215.05 |
| Details |
Defi - Controller II |
| Defi-Link Control Unit II is a necessary controller to install Defi-Link Meters, Defi-Link Meter BFs, and Defi-Link Displays. Up to 7 gauges and displays can be connected and controlled by one Control Unit II. The name of the connection system is "Defi-Link System." Defi-Link System allows gauges and displays to be attached to Defi-Link Control Unit II with a single "DAISY CHAIN" wiring system. Driving data can be stored and can be replayed up to 3 minutes. Pause, speed play, forward, and rewind function can be applied during playback. Double Warning function by a meter's LED lamp and a beep. The switch panel is embossed and buzzer sounds by pushing the buttons. The characters and the rings on the switch panel are illuminated in white at nighttime. It makes operation in the dark easy. Differential pressure between fuel pressure and turbo can be shown if both of fuel pressure meter and turbo meter are installed. |
£103.50 |
| Details |
Defi BF - Boost - Blue |
| Available in both 2.0 Kgf/cm² (equivalent to bar) or 28psi, in 60mm ONLY. Beautifully built, these are proper electromechanical gauges with stepper motors for a smooth and accurate operation (not to be confused with normal mechanical gauges). Have benefit of user set and defined alarm warning feature, peak memory recall and the ability to record and play back 3 minutes worth of information, plus the unique black face display when the gauge is shut down. DELIVERY is extra. |
£215.05 |
| Details |
Defi BF - Boost - Red |
| Available in both 2.0 Kgf/cm² (equivalent to bar) or 28psi, in 60mm ONLY. Beautifully built, these are proper electromechanical gauges with stepper motors for a smooth and accurate operation (not to be confused with normal mechanical gauges). Have benefit of user set and defined alarm warning feature, peak memory recall and the ability to record and play back 3 minutes worth of information, plus the unique black face display when the gauge is shut down. DELIVERY is extra. |
£215.05 |
| Details |
